Futaba FF10CG (10CAG/10CHG) 2.4GHz 10ch Transmitter & R6014HS 14ch High Speed Receiver w/ Tx & Rx Batteries

2009 NEW 2.4Ghz Futaba T10CAG and T10CHG transmitters! Built-in 10 channels 2.4Ghz module, light in weight, no need to plug in the TM module anymore! NEW R6014HS supports high speed communication with Futaba's digital servos to provide real-time action for your plane.

You may control your airplanes, helis and gliders all with this single 2.4Ghz radio system! The software is available in six languages: German, English, French, Italian, Spanish and Dutch.

The 2.4GHz system that offers the impossible: Pro-level features at a sport-system price.

Some people feel that a 2.4GHz system with a built-in module will always offer better response than a modular system. Nothing could be further from the truth.

The 10C is a modular system, yet offers response superior to most “dedicated” systems. Why? Because response doesn’t depend on whether your module is built-in or modular. It depends on whether your signal starts in analog or digital form.

Converting a signal from analog to digital form requires processing time — what you experience as lag. The 10C, on the other hand, was designed with a totally digital data stream. The signal starts digital and stays digital. Since no additional processing is needed, there’s no lag, either — just virtually instantaneous, real-time response.

System Overview

Specifications

Big, 160 x 72 LCD with backlighting, adjustable contrast & auto-off Dial ‘n Key™ programming w/joystick navigation 15-Model memory (expandable w/optional CamPACs) 10-character user name 10-character model name 2048 resolution in FASST 10-channel mode Basic & Advanced menus Enhanced airplane, heli & glider software Smart Switch Technology™ (SST) — Logic Switches allow you to activate a function when specified switch and/or stick positions occur Up/down on/off timer (activate by stick or switch) Tracks service hours for radio and models Mode 1-4 selectable (Modes 3 & 4 programmable) Assignable functions/switches Auxiliary channel screen — for 1-step function/switch assignment & eliminating unused auxiliary functions 2 proportional slider switches Digital trims on all 4 main channels Trim memory & sub-trims (all channels) Adjustable trim steps (1-40) Fail-safe, servo reversing & EPA “Full Functionality” trainer system (cord required) Flap switch (3-position) Retract switch Rotary Dial (3) Adjustable Throttle Cut/Idle Down Sticks w/length & tension adjustments Servo cycle w/bar graph displays Constant trim, voltage, name and timer display CE Certificated Enhanced Features Slider Switches Rotary Dials More Programmable Mixes More Factory-Defined Mixes R6014FS Receiver Built-in 2.4GHz Transmitter Module (non-removable)

Advanced Airplane Menu 8 Programmable Mixes (4 linear/ (4) w/5-point curves) 9 Factory-Defined Mixes: Elevator-Flap; Ailvator (for dual elevator servos); Throttle-Needle; Aileron Differential; Flaperon; V-Tail; Elevon; Snap Roll; and Air Brake w/elevator delay Dual/Triple rates (4 ch.) Exponential (4 ch.) Idle down Throttle cut Throttle delay Throttle Hold & Idle-up w/delay 2 independent gyro settings 7-point throttle curve Flap trim Advanced Heli Menu The 10C accepts separate gyro sensitivity, governor speed and servo travel rates for up to 4 flight modes — and automatically changes all three when the flight mode changes. 6 Programmable Mixes (4 linear/ (2) 5-point curves) 8 Factory-Defined Mixes: Hover-Throttle; Hover-Pitch; Throttle-Needle; Governor; Offset; Revo (5-pt.); Delay; and Throttle Mix (ail/ele/rdr) Gyro Menu 8 Swash plate types w/grapichs Swash Plate AFR 7-point throttle curves and (5) (including throttle hold) 7-point pitch curves Adjustable High/Low pitch setting 3 Adjustable Idle-up conditions Advanced Glider Menu 8 Programmable Mixes (4 linear/ 5-point curves) 12 Factory-Defined Mixes: Butterfly-Elevator; Elevator-Flap; Chamber Mix (w/ail/ele/rdr adj.); Aileron-Flap; Aileron-Rudder; Flaperon; V-Tail; Flap Trim; Butterfly w/spoiler adj; and 4-point Offset (w/camber adj. for basic/launch/thermal/speed) Adjustable spoiler Adjustable Throttle Cut Single/Dual Aileron and Flap Servo Selections Start, Speed, Distance & Landing conditions, Adjustable Airbrake Activation Adjustable Motor Cut

Combo Includes:

• T10CHG or T10CAG Transmitter
• R6014HS 14ch 2.4GHz Receiver (with High Speed Feature!)
• Wall Charger FBC-18C(4) or compatible charger (230V EU plug. We can also provide the 110V US/JP charger on request, usually take 2-3 days)
• 700mAh Transmitter Battery NT8S700B
• 1000mAh Receiver NiCD Rechargable Battery NR-4RB
• On/Off Switch Harness, FUTM4385

NEW! R6014HS Receiver:

R6014HS is a new version 2.4Ghz Receiver from Futaba. It could be operated in Normal Mode or High Speed mode. The Normal Mode accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The High Speed Mode accept the digital servos for outputs from 1ch to 6 ch, including BLS Series, and most peripheral equipments such as the gyro or brushless ESCs. The frame rate of the outputs is 7ms. The R6014HS is comptaible with the Fasst Transmitters with TM8 ( on 8Ch mode), TM10 (on 10Ch Mode), TM14 (on multi-ch mode)

R6014HS Receiver Specifications:

Receiver Frequency: 2.4GHz bands

Channels: 14

High Speed Mode: 1-6 channels support high speed digital servos (possible to mix with normal servos)

Length: 2.06" (52.3mm)

Height: 0.63" (16.0mm) Width: 1.48" (37.5mm)

Weight: 0.72oz (20.8g)

Current Drain: 700mAh

Power Requirement: 4.8 - 6V NiCd battery or regulated output from ESC

Specification for Transmitter T10C:

Operating System: 2-Stick, 10-channel, FASST-2.4G System

Modulation: 2.4G-10ch (default), 2.4G-7ch Switchable

Power supply: 9.6V, NT8S700B included

Standard Wall Charger:

Input: 220V AC 50Hz 7W (default)

Output: TX 9.6VDC 70mA

RX 4.8VDC 100mA

Enhanced Swash Plate Screens	Switch or Stick Timer Activation	7-Point Throttle Curves
Simple, One-Screen Setup for Switches & Functions	Smart Switch Technology™ (SST) : Flexible Setup, Automatic Ease	Simplifying Sailplane Setup
Constant Trim, Voltage, Timer & Name Display	Programming for Sailplane Events	R6014FS Receiver